Installing Insulation – Tips For Insulating Your Basement

Insulating your basement is a really good idea as it’s a lot cheaper to do and you can save a ton of money by insulating your basement. There are many ways that you can insulate your basement but one of the simplest ways to do this is with wood shake. purchase by brand has some nice tips on this.

The reason that wood shakes is so popular is because it’s cheap and easily made. There are two main types of shakes, the first is made up of plywood or particle board and the second is made from hollowed-out trees, then the material is treated with a fire retardant, which will make it last for years. The shakes are attached to your walls with dowels and fastened with tongue and groove or pocket screws. You want to make sure that the dowels are long enough so that it will have an adequate amount of insulation. This is where the dowels should go, it shouldn’t be too long but not short. You can find this type of shake in most hardware stores in your area. If your area doesn’t have a lot of hardware stores then you can go to your local Home Depot or Lowes and look for it in their garage.

Another thing to keep in mind when you install insulation is that you need to get some sort of water-proofing agent on it. This will help protect your basement against any damage that may occur from water. After you have insulated your basement, you need to ventilate it regularly to keep it from getting wet. Remember that you don’t want your basement to get wet because that would cause rotting of the wood and it would be hard to get rid of. All you really need to do is put some type of water proofing agent on it to keep it dry and that should be it.

Theme: Overlay by Kaira Extra Text
Cape Town, South Africa